Automatically Imported
This page was automatically imported and has not been manually cleaned up and checked yet.
There might be strange or incorrect formatting, dead links, and other issues.
Rigol DS2000 series
| Status | Supported |
| Channels | 2 |
| Website | http://www.rigolna.com/products/digital-oscilloscopes/ds2000/ |
The Rigol DS2000 Series are 2-channel oscilloscopes with an analog bandwidth of 70-200MHz and 2GS/s sampling rate.
Except for small software differences all models in the series are identical.
There exist two versions of the hardware, version 1 and version 2. Version 2 has a redesigned PCB which is prepared for additional modules, a signal generator and apparently a logic analyzer. Additionally version 2 hardware has the hardware fitted to switch the input impedance to 50 ohms. This is only accessible through SCPI commands, the option in the menu is disabled (as of firmware version 01.01.00.02).
Devices
| Model | Bandwidth |
|---|---|
| DS2072 | 70MHz |
| DS2102 | 100MHz |
| DS2202 | 200MHz |
Protocol
The device uses USBTMC or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.
Resources
- EEVblog forums: Review of the Rigol DS2072
- EEVblog: Teardown video of the Rigol DS2202
- High resolution images of the innards of Rigol DS2202 from EEVblog